V2K and SAT signal. Plan. Interception.

SAT signal is first in the world possibility to transmit VOICE and VISION.

It was invented after radio waves and just like with computers, the size of SAT devices was changed and reduced to micro scale so it is possible to set the V2K transmitters on human's brains.

SAT signal is microwave. It's frequency: 10,7 GHz to 12,7GHz.

We hear them because of radio receivers on our brains changing the radio wave to electrical pulse possible to pick up by neurons.

This point made terrorists panic so I was sure my investigation is correct.

After that I am trying to intercept, catch this signal using TV devices and display on TV this what is displayed by terrorists.

But before I will go to the police or court I want to record animations, music and movies because I am an artist and I have the right to do this as a victim.

I invite every victim of V2K to do the same and I offer my help as a detective.

You can earn money on it! You deserve it! This is the way which will turn our suffering into happines and money. We can create real and strong community, use our money to build something good and defeat evil we are aware of.

If you don' t want to record anything you should do it anyway to get strong, real proofs and avoid calling you crazy, to make terrorists finaly feel the consequences of their actions.

Interception of SAT signal that our heads emit

In order to intercept, catch the SAT signal that our heads emit, we must buy the necessary equipment

 1. Satellite dish, universal converter, SAT cable and connectors to it.

 2. A simple SAT finder meter that allows you to determine the polarity of the signal. (It is important that it is equipped with 4 lamps to indicate it).

 3. More professional Rover HD 4 Tab Easy meter, which will allow me to determine the frequency of the signal I am sending.

         (Unfortunately, this will be a manual search "on foot" and it will take about 4 hours)

         If you have such an opportunity, I recommend the "Abovio" brand Neon S2 meter which automatically detects the frequency, polarization and symbol rate of          the signal received by the antenna.

  4. TV set-top box with manual frequency, polarization and rate symbol input. (necessary to enter data obtained from the meters)

The interception is divided into three stages:

(If we don't have Neon S2)

 1. Learning about polarization.

         For this you will need:

> Satellite antenna. (preferably medium or large).

> Universal converter.

> A few meters of SAT cable.

> Cable ends to attach to devices.

> Tilt finder SAT meter, with four lamps. (without the lamps we will not know the polarization).

> A decoder that constantly feeds current to the "LNB IN" socket.

To determine the polarization, you need to set the antenna in one place, just like in the recording I made. However, I recommend placing it over your head as it is much more comfortable.

It is very important to prepare and connect SAT cables to the devices.

(I did it wrong at first and thougt that SAT finder is not working)

When the SAT finder starts working, set its sensitivity to half the scale or a little over half and tilt your head towards the antenna. Then the SAT finder will react and the lights will show us the polarity. When learning about polarity, I advise you to be patient as SAT finder may not respond immediately. You should wait a while for the converter to catch the signal.

SAT finder catches the signal when the tip goes up and the tone of the sound becomes higher. We are sure that we emit the signal than.

It looks like that:

It is better to repeat this test several times to be sure of the measurement.

(Disconnect the decoder from the power supply and turn it on again)

Error in determining the polarity will result in a failed capture ...

The determined polarity should be written down on a piece of paper, because it will be needed in the further part of the signal capture.

How to read data from the SAT finder meter:

In any case, two lights will be on.

13V / 0KHz - Vertical polarization / Lower band (10700 MHz - 11700MHz)

13V / 22KHz - Vertical polarization / Upper band (11700MHz - 12700MHz)

18V / 0 Khz - Horizontal polarization / Lower band (10700MHz - 11700MHz)

18V / 22KHz - Horizontal polarization / Upper band (11700MHz - 12700MHz)

We will need this information when using a professional meter.

We have to introduce our kind of polarization on it, and then search the detected frequency band on which we transmit. we only have 1000 items to search.

When the SAT finder fluctuates between the high and low bands, the frequencies we are looking for are at the limit.

2. Determining the frequency and symbol rate using professional meter. For this you will need:

 > professional SAT meter with manual frequency setting and analysis of the entered frequencies.

         (The Rover HD 4 tab easy meter has the "help" function. It consists in the fact that I select the frequency with the knob, then I use the help function and the          meter checks if the frequency that the converter catches is the one I chose on the meter and finds, by the way, the symbol rate).

 > Satellite antenna.

         In my opinion, it is better to set it as it was, relative to the head while determining the polarity.

         On a professional SAT meter we choose the predetermined polarization, so changing the antenna orientation may result in a wrong choice.

         (I don't know if it really is. When receiving TV, all antennas are alike, never upside down. Better be careful.)

 > Universal converter.

 > SAT Cable.

 > Cable terminals.

So everything that was before, except the decoder. We only add a professional meter.

We enter the type of polarization, and then we search from 10700MHz to 11700Mhz if we previously detected the lower band, or we are looking for from 11700Mhz to 12700Mhz if we previously detected the upper band.

After some time of searching we should find our frequencies and our thoughts and what we see will be displayed on the meter screen. Each such meter also has a speaker, so we will hear things that interest us...

You should write down what you have established, that is: polarity, frequency, symbol rate.

3. Receiving the signal by the decoder and TV.

We set up everything as for satellite TV reception, with the difference that we aim the antenna at the head.

Enter the collected data on the decoder and the picture and sound should be played by the TV set.

(In my opinion, the choice of satellite on the decoder does not matter, because each of them could transmit on our frequencies as well).

I recommend set-top boxes with internal 500Gb or 1Tb disks, with the possibility of recording what the TV plays and necessarily with the possibility of transferring these files to another disk.

It is also worth setting the camera behind you so that it records the entire installation and the second camera directed at the face.

I have an idea to call my friends on messenger using my phone's camera and ask them "what should I imagine?"

For example, a hyena or a rat with a banana instead of a head or other abstract things, preferably the whole series, so that they can be sure that what they see is not pre-recorded and they are not skeptical.